Research Projects
Publicly Funded Projects
indie is an innovative company that constantly tries to improve and gain cutting-edge knowledge. This results in regular investment in research activities and exchange with other companies doing research. Here you will find a selection of our current and past projects, some of which are publicly funded.
BrainEpp – Bio-Interferometry for Epilepsy Diagnostics in Pediatrics
Objectives
- The BrainEpp project (“Bio-Interferometry for Epilepsy Diagnostics in Pediatrics”) is intended to enable new contactless and stress-free epilepsy diagnostics in children from preterm to toddler age and leads to a functional demonstrator for testing in children with epilepsy of different ages.
- The goal of indie is to develop sensors that can take the patient’s signals without contact, to determine the frequency of seizures for diagnostics and to generate warning signals after appropriate signal processing.
Partners
- Lehrstuhl für technische Elektronik, Erlangen-Nürnberg, Germany
- btu Cottbus, Allgemeine Elektrotechnik und Messtechnik, Cottbus, Germany
- Klinisch-Experimentelle Forschung Paliativmedizin (FAU), Erlangen-Nürnberg, Germany
- indie Semiconductor FFO GmbH Frankfurt (Oder), Germany DeMeTec, Langgöns, Germany
- 4PLUS, Erlangen, Germany
- Geratherm Respiratory, Bad Kissingen, Germany
- Neuropädiatrie Universitätsklinikum Erlangen, Germany
- The BrainEpp project is funded by the Federal Ministry of Education and Research.
DIFFERENT – Digital beam forming for low-cost multi-static space-borne synthetic aperture radars
Objectives
DIFFERENT aims at building the foundation of a new generation of space-borne Synthetic Aperture Radars (SAR) with a significant reduction in cost, size, mass and power consumption, and enhanced performances with respect to systems currently available. The final product will be a compact, low costdual-band, dual-polarization radar with DBF capabilities and the highest level of integration where the radiating board is entirely integrated with digital and analogue chips in a single multilayer board.
DIFFERENT will achieve these results setting up a consortium between SMEs and research institutions todevelop and to exchange technologies and know how to improve competitiveness of SMEs.
DIFFERENT targets the full and stable integration of SMEs into the Earth Observation value chain by developing know how in the following key areas which are recognized as strategic for the future scientific and commercial missions
- Radiation hard SiGe BiCMOS integrated circuits
- Advanced integration techniques
- Digital Beam Forming techniques
Partners
indie Semiconductor as one of the partnering SMEs acts as the consortium leader in DIFFERENT. SMEs central position in DIFFERENT is supported by a number of main players having a leading role in the Earth Observation value chain.
- Deutsches Zentrum für Luft- und Raumfahrt (DLR), Germany
- Evatronix IP Spolka z ograniczona odpowiedzialnoscia, Poland
- Innovative Solutions in Space (ISIS), The Netherlands
- IHP – Innovations for High Performance Microelectronics, Germany
- University of Calabria, Italy
- University of Kent, United Kingdom
- indie Semiconductor FFO GmbH, Germany
The project is supported by a grant from the European Commission in 7th Framework Programme on SME space technology research and technology transfer.
ELIRAD – Everyday Life Radar Sensors for Transportation
Miniaturized radar front end with excellent performance – an all-rounder for a broad spectrum of applications.
Objectives
In front of the background of Internet of things countless autonomous transportation systems need to have precise information about surrounding obstacles and the velocity and direction of movement of it.
The problem: A huge number of emerging applications and markets will not see its take -off until a tremendously improved sensor technology is implemented.
Among these applications are:
- Autonomous transportation systems (hospitals and logistic storage areas)
- Blind spot detection and 360° surround view for heavy vehicles and special vehicles of agriculture
- High precision distance sensors for gesture-based in-car HMI (or 3D augmented glasses)
- Collaborative robots, domestic service robots &industrial sensors
- Ambient living sensors for life signs detection (hard beat and respiration)
- Security and surveillance systems
- Civilly used unmanned aerial vehicles
All of such applications have special requirements in common:
- highest possible miniaturisation and integration of functionality
- low weight and material consumption
- low power consumption
- excellent measurement accuracy
- robust measurement principle
- low cost technology
In the course of SUCCESS (FP7 ICT project number 248120) indie Semiconductor successfully developed an ultra-compact 120 GHz radar front end. Together with its consortial partners, indie Semiconductor showed the feasibility of a silicon-based low cost radar front end with integrated antennas in an 8×8 mm package.The publications of the miniaturized front end were met by a huge wave of interest and demand from several transportation applications showing the enormous market opportunity.
Now, it is E L I R A D’s objective to reach the product status of the radar sensor and its commercialisation.
indie Semiconductor’s Contribution
indie Semiconductor is going to further develop the radar IC and to establish a testing process suited for low cost serial production. Furthermore, indie Semiconductor is going to commercialize the results of E L I R A D. indie Semiconductor’s Sensor will be the world-wide first on the market realizing following features:
- Miniaturized light-weight radar sensor (in comparison to existing systems)
- Which is available to all requesting transportation customers (not limited to military or automotive)
- At real low cost (possible by using SiGe technology and low cost packaging concepts)
- Providing excellent measurement accuracy (based on the 1 GHz bandwidth at 120 GHz ISM band)
- With real low power consumption property (compared with existing discrete III/V solutions).
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 712491.
Fast Imaging
A new OFDM (orthogonal frequency division multiplexing) MIMO (multiple input multiple output) radar system
Objectives
This new radar architecture has a very high potential to fulfil the requirements for high resolution imaging radars in regard to their real-time ability while maintaining small system cost and low hardware effort. Those properties of radar systems are demanded for future applications in the aviation sector (e.g. obstacle alarms for helicopters or collision avoidance for aircrafts on the runway), the security sector (e.g. surveillance of luggage, borders or buildings, people screening), and the automotive sector or in automation.
To reach these goals this project combines innovative approaches in order to develop a real-time capable high resolution radar system:
- The single channels of the MIMO-radar are operated synchronized with OFDM-signals, so that a digital separation because of orthogonality is possible. By that the system becomes real-time capable.
- By the use of our partner IHPs’ outstanding SiGe BiCMOS technology the operational frequency is designed to be adjustable in the ultra-wide band between 4GHz and 40GHz.
Therefore a best possible flexibility in terms of different requirements can be reached: the resolution of the imaging, miniaturisation and the systems’ options of integration, reach and national frequency regulations.
By combing the OFDM-MIMO radar architecture with the SiGe-technology a cost effective system solution can be achieved.
In the project indie Semiconductor develops the SiGe-circuits and the Frequency-Synthesizer.
Partners
- IHP – Leibniz-Institut für innovative Mikroelektronik
- Airbus Defence and Space GmbH (Airbus Group Innovations)
- TU Dresden
- indie Semiconductor FFO GmbH
This project receives funding from the initiative „Zwanzig20 – Partnerschaft für Innovation“ by the Federal Ministry of Education and Research Germany.
BMBF Project EMPHASE
Energy-saving multi-processor platform for highly automated electric driving
Project duration: 01 / 2017 – 12 / 2019
Fulfilling contradictory requirements for automated driving requires innovative solutions for embedded systems in vehicles. High performance, maximum reliability and safety as well as low energy consumption cannot be achieved at the same time by using classical paradigms.
In addition, in particular for automated driving in complex traffic situations, it is profitable to use not only local sensor systems but also Car2Car and Car2X networked systems as part of a sensor fusion. As a result, dangerous situations such as ice-covered roads or dramatically deteriorated visibility can be detected by using the environment sensors of other road users.
With EMPHASE the development of innovative solutions for an energy-efficient and reliable environment detection in vehicles shall be made possible. The project is breaking new ground in terms of dynamic data acquisition, processing and communication on distributed hardware.
Objectives
The aim of the EMPHASE project is a computer system for sensor data processing in automated vehicles, consisting of customizable sensor and communication modules. These are networked in a flexible architecture and connected to a particularly reliable central control unit.
Sensor data can thus be processed dynamically and distributed throughout the system and also communicated to other road users. This promises both high reliability and energy savings, since individual components can be deactivated if necessary. The resulting, energy-efficient computer platform can also benefit, in particular, automated electric vehicles.
indie Semiconductor’s contribution
indie Semiconductor will contribute to the following work packages as part of EMPHASE:
- Requirements analysis and architecture specification
- Sensor development
- Development and construction of a demonstrator
Partners
- IHP – Leibniz Institute for Innovative Microelectronics, Frankfurt (Oder) (Project Coordinator)
- indie Semiconductor FFO GmbH, Frankfurt (Oder)
- SYSGO AG, Klein-Winternheim
- Cadence Design Systems GmbH, Feldkirchen
- Technical University of Braunschweig
- Infineon Technologies AG, Neubiberg
- DENSO AUTOMOTIVE Germany GmbH, Eching
- AUDI AG, Ingolstadt
- AbsInt Angewandte Informatik GmbH, Saarbrücken
The EMPHASE project is funded by the Federal Ministry of Education and Research and is fully aligned with the research objectives in the field of “Electronic Systems for Fully Automated Driving (ELEVATE)” within the framework of the “IKT2020” funding program.
BMBF Project KameRad
Highly integrated camera radar module as a basic building block for autonomous driving Project duration: 01 / 2017 – 12 / 2019
Automated and connected driving is an essential component of future intelligent and sustainable mobility. The implementation of fully automated driving functions also depends in particular on technological advances in electronics and sensor technology. One of the challenges is to reliably detect the environment in all weathers, so that navigation and collision protection also work in complex driving situations.
Objectives
As part of the KameRad project, a highly miniaturized multi-sensor module for environment detection in autonomous driving is to be developed. The sensor module is to be equipped with embedded data processing so that part of the sensor data fusion and evaluation can be performed decentrally in the sensor module. System aspects and sensor components are considered, design technologies for heterogeneous system integration are developed and data processing algorithms are developed and investigated.
Thus, the consortium contributes to the safety of autonomous driving in an urban environment and to increasing the energy efficiency of transport.
indie Semiconductor’s contribution
indie Semiconductor will contribute to the following work packages as part of KameRad:
- Specification of the sensor platform
- Development of the sensor module (hardware)
- Test and qualification of the sensor module
Partners
- InnoSenT GmbH, Donnersdorf (project coordinator)
- Fraunhofer Institute for Open Communication Systems (FOKUS), Berlin
- Jabil Optics Germany GmbH, Jena
- indie Semiconductor FFO GmbH, Frankfurt (Oder)
- Technical University Berlin
- Fraunhofer Institute for Reliability and Microintegration (IZM), Berlin
- AVL Software and Functions GmbH, Regensburg
- John Deere GmbH & Co. KG, Kaiserslautern
The KameRad project is funded by the Federal Ministry of Education and Research and is fully aligned with the research objectives in the field of “Electronic Systems for Fully Automated Driving (ELEVATE)” as part of the funding program “IKT2020”.
Research Project EuroPat-MASIP
European Packaging, Assembly and Test Pilot for Manufacturing of Advanced System -In-Package Project runtime: 01 April 2017 – 31 March 2020
Objectives
The EuroPAT-MASiP project will consolidate and extend the European leadership in semiconductor processing know-how by developing and fostering packaging related technological and manufacturing building blocks, serving different (emerging) industrial sectors.
EuroPAT-MASiP will develop:
- Modelling, design and simulation of packaging related key features and challenges
- The key packaging technologies, equipment and materials
- Heterogeneous (3D) integration of the smart system building blocks (More than More, MtM) and System in Package (SIP)
- Test strategy including metrology, methods and equipment, reliability and failure analysis
EuroPAT-MASiP aims to:
- Increase the competitiveness and the global market share of the European semiconductor industry
- Foster the competence and capabilities of semiconductor packaging
- Accelerate the manufacturing uptake of the new technologies and shortening time-to-market
indie Semiconductor will contribute to the following Work Packages:
- Integration Concepts, Design, Modelling & Simulation
- Packaging Technology, System Integration and Manufacturability
- Metrology, Characterization, Test Strategy, Reliability and Failure Analysis
- Dissemination and Exploitation
Learn more about the EuroPAT-MASiP project at www.europat-masip.eu.
EuroPAT-MASiP Consortium
The EuroPAT-MASiP project involves most of the semiconductor value chain, ranging from material suppliers to software design and packaging foundries to test houses.
This project has received funding from the Electronic Component Systems for European Leadership Joint Undertaking under grant agreement No 737497. This Joint Undertaking receives support from the European Union’s Horizon 2020 research and innovation programme and Portugal, Austria, Netherlands, Finland, Germany, Hungary, Ireland, France, and Sweden.

Innovation & Research Projects
The next decade will bring game-changing innovations to the automotive industry.
Within our research we anticipate the needs of the market ahead of time.
In-Cabin Analysis
(DMS & OMS)
We are constantly developing new innovations in the field of in-cabin general analysis for driver and occupant monitoring. emotion3D aims to be at the forefront of innovation, offering our customers and partners new possibilities for their vehicles.
IRoADSim addresses a critical societal challenge: driving under the influence of alcohol and drugs, by advancing predictive driver behaviour modelling and assessment. The project develops an integrated approach combining AI-based in-cabin monitoring with a cyber-physical simulation environment to capture and analyse impaired driving behaviour. In IRoADSim, emotion3D acts as the coordinator and leads the development of AI-driven in-cabin analysis systems. Supported under the Eureka Xecs programme, which fosters industry-driven international collaboration in Electronic Components and Systems to accelerate sustainable digital innovation and market-oriented technological development, its work focuses on extracting behavioural indicators from visual data, modelling attention and impairment patterns, and enabling predictive detection of dangerous situations.
Partners: Organizations from Portugal | Latvia | Turkey
Funding agency: FFG Austria
Further information on the dedicated FFG page of the project: https://projekte.ffg.at/projekt/5136740 .
The UNISCOPE-3D project aims to develop highly innovative software algorithms that enable robust and accurate three-dimensional (3D) human body tracking and analysis using a single camera. By leveraging advanced computer vision techniques and Deep Learning (DL) algorithms, the software will (i) extract 3D keypoints inside and on the surface of human bodies in 3D space from single (monocular) camera images and (ii) exploit this information to generate a comprehensive understanding of complex 3D human actions, movements, and interactions in real-world environments.
This understanding of humans is essential for a wide range of industries and applications. In this project, we apply and evaluate it in emotion3D’s core business area of automotive Occupant Monitoring where it can enable advanced human-machine interaction and user experience, intelligent and personalized safety (e.g. personalized airbag deployment) and automation.
Partners: TU Vienna
Funding agency: This project is funded by the FFG within the Basisprogramm.
There is a growing consensus among experts that, while DMS is a valuable safety feature, it should be complemented by comprehensive, context-aware solutions and adherence to rigorous regulations to truly achieve the ambitious goals set by initiatives like the EU Vision Zero for road fatalities.
Currently, the available systems in European series vehicles are limited in their ability to detect and respond to different types of driver inattention. Traditional vehicle sensors are not yet equipped to meet the requirements of partially automated driving or contextual warning mechanisms. As a result, there is still a lot of room for improvement in terms of developing more advanced systems that can better assist drivers in various driving scenarios. More specifically, roadguard is working towards combining interior with exterior sensing capabilities.
The system utilizes advanced AI-empowered edge devices to monitor drivers and road users, setting new safety benchmarks. The project’s key contribution involves developing a holistic perception and assessment system that seamlessly integrates data from diverse sensors. This comprehensive approach addresses regulatory challenges and establishes our USP—providing unparalleled safety for all road users, especially the vulnerable, and contributing to responsible and technologically advanced mobility in the EU.
Partners: Virtual Vehicle | ZKW | leiwand.ai | motobit
Funding agency: This project is funded by the FFG within the Digital Technologies-2023 program.
MOSAIC’s goal is to push the technological independence further in the landscape of automated systems by tackling the challenge of integrating diverse perception hardware configurations, ensuring that automated systems can perceive their surroundings in a non-invasive manner, avoiding a single point of failure, with unparalleled accuracy and decreased complexity.
emotion3D will contribute to the MOSAIC project by developing advanced perception technologies to enhance cognitive system intelligence for automated systems. This effort involves integrating multiple state-of-the-art sensor technologies, such as camera and radar sensors, and accompanying, sophisticated algorithms to significantly improve the system’s capacity to perceive and interpret its environment with high accuracy. This approach reduces the risk of single points of failure and contributes to the increase of the overall robustness and reliability of automated systems.
Partners: 48 European partners including Infineon | Ford Otomotiv | TTTech | TTControl | NXP | AVL
Funding agency: This project is funded by the HORIZON-JU-Chips-2024-2-RIA Program.
A-IQ Ready addresses two major Trends: “Internet of Things (IoT): From 1 Billion $ to 1 Trillion $ revenues ” and “From Cloud to Edge”. A-IQ Ready will apply 3 disruptive technologies: Quantum Sensor, neuromorphic acceleration, AI in multi-agent systems to build the edge continuum as the digital backbone for the Society 5.0. A-IQ Ready proposes cutting-edge quantum sensing, edge continuum orchestration of AI and distributed collaborative intelligence technologies to implement the vision of intelligent and autonomous ECS and to deliver A-IQ IoT for the digital age.
Within this project, emotion3D is working towards the optimization of driver monitoring functions towards planning the driver’s work to predictively help avoiding dangerous situations.
Partners: 49 European partners including Huawei | TTTech | Synopsis | Mercedes Benz | AVL
Funding agency: This project is funded by the HORIZON-JU-Chips-2024-2-RIA Program.
More information available at https://www.aiqready.eu/
The aim of this project is to develop an innovative system that has the ability to recognize the emotional states and body language of a vehicle’s occupants. By using modern technologies such as computer vision and machine learning (ML), the vehicle should be able to understand the emotions, moods and needs of the occupants and react accordingly. As part of the project, extensive user studies are being carried out in laboratory environments, but also in real vehicles and using several additional sensors. On the one hand, this will create data sets that are currently not available and, on the other hand, new methods of artificial intelligence for emotion-based support of human driving behavior will be researched and evaluated. By integrating emotion and body language recognition into the vehicle system, the project contributes both to improving road safety and to enhancing the user experience (UX), two key selling points of vehicles.
Partners: TU Vienna | University of Applied Sciences Technikum Vienna
Funding agency: This project is funded by Wirtschaftsagentur Vienna within the program
Within this project, emotion3D is working towards the optimization of driver monitoring functions towards planning the driver’s work to predictively help avoiding dangerous situations.
Partners: 49 European partners including Huawei | TTTech | Synopsis | Mercedes Benz | AVL
Funding agency: This project is funded by the HORIZON-JU-Chips-2024-2-RIA Program.
More information available at https://www.aiqready.eu/
The system targeted within this project will be based on a realistic and highly complex task from the automotive industry – the interior analysis of vehicles (interior monitoring) – and will enable emotion3D to investigate important system aspects of camera networks (e.g. dependencies of individual processing stages or effects of hardware configurations on the overall performance). The envisaged end result is a system concept optimised in terms of quality, robustness and adaptability for the analysis of 3D scenes using camera networks. The system will be scalable and used for monitoring vehicle interiors of conventional as well as autonomous vehicles.
Read more about the project on the official site of FFG (Austrian Research Promotion Agency) by clicking here.
Funding agency: This project is funded by the FFG within the Early Stage 2019 program.
In the i3DOC project, an embedded vision platform for new applications based on stereo and 360° vision in the industrial / safety-relevant environment is to be researched. Solutions suitable for use in automotive are only available to a limited extent and either only address individual aspects or are based on PC architectures and are therefore largely unsuitable for mobile or even cost-sensitive applications. The aim of this project is to conceptually develop an embedded architecture for 360° 3D vision applications for safety-relevant applications and to validate the selected architectural approaches.
Partners: Mission Embedded | emotion3D
Funding agency: This project is funded by the Wirtschaftsagentur Wien as part of the funding initiative Co-Create 2017 within the FORSCHUNG program.
Safety Systems
and Trustful AI
In-cabin analysis enables a broad range of innovative automotive safety systems. In terms of active safety, monitoring the driver for drowsiness and distraction can hugely increase driving safety. However, not only active safety systems benefit from in-cabin analysis information. Also the performance of passive safety systems such as airbags can be vastly improved by precise real-time information on each occupant.
It is essential that this increased safety is provided for everybody, i.e. works equally well for each person who sits down in a car. Thus, the topic of trustful and ethical AI must be considered during development of the analysis algorithms. The frameworks and tools we currently develop make sure that all the safety systems work unbiased and provide optimal protection for everybody.
Worldwide, over 1.4 million people die each year in road accidents (WHO) and millions more suffer from injuries. Mandatory passive safety systems trigger airbags and tense seat belts in event of a crash to reduce the number of fatalities and heavy injuries. However, these systems follow a ”few-sizes-fit-all” development approach and thus perform best for a small number of specified body physiques – the most common one is the “average male”: 175cm, 78kg. This is suboptimal for everybody who deviates from these averages – children, elderly people and even woman.
Studies have shown: Any seatbelt-wearing female occupant is at 73% more risk to suffer from serious injuries than seatbelt-wearing male occupants (Univ. Virginia). Also, female occupants are at up to 17% higher risk to be killed in an accident than male occupants (NHSTA).
As long as passive safety systems cannot distinguish between the occupant’s individual characteristics, it is impossible to achieve optimal protection for everybody.
For the first time, touchless 3D imaging sensors are used to derive precise real-time information about each occupant, such as body position and pose, body physique, age, gender, etc. Based on this information, the Smart-RCS computes the optimal deployment strategy tailored to each individual occupant.
By taking those relevant factors into account, Smart-RCS optimizes the protective function while simultaneously mitigating the risks of doing unnecessary harm.
Smart-RCS aims to disrupt the passive safety systems market by introducing personalized and situation-aware protection.
Learn more on our project website: www.smart-rcs.eu
Funding agency: This project is funded by the European Commission within the Horizon 2020 FTI program.
The Safe.ICM project deals with the specification and analysis of complex algorithms from the field of machine learning. Several simple detailed tasks are linked together in order to describe more complex tasks in a simple way. For example, it is difficult to describe an algorithm that accurately describes the level of attention of a driver without additional knowledge. However, if the description of attention is broken down to detailed aspects, such as gaze direction, head orientation, detected objects in the field of view, etc., an accurate description of attention is enabled.
In addition to the precise description of a complex context, this also allows a meaningful evaluation of the information. For example, accuracy can be be evaluated under several different conditions. In a further step, this evaluation or analysis of the networks enables exact statements with regard to the diversity, non-discrimination, fairness and robustness of the algorithms.
Accordingly, the goal of this project is to develop a framework for developing and optimizing trustworthy AI applications to increase the transparency, diversity, non-discrimination, fairness, and robustness of machine learning algorithms. Since traceability is essential for the use of algorithms in the automotive industry and in safety-critical environments, the framework developed in this project will be applied, tested, continuously improved and optimized using algorithms for vehicle in-cabin analysis.
Funding agency: This project has received funding from aws, by the means of the “Nationalstiftung für Forschung, Technologie und Entwicklung”.
ACCOMPLISH aims at increasing the readiness of enterprises of any size to face an era of unprecedented regulatory scrutiny by simplifying, integrating, and automating compliance in their data/AI operations, their data/AI assets, their solutions/platforms, and their overall organisations. ACCOMPLISH brings forward a one-stop-shop mentality in multifaceted compliance from the regulatory, ethics, environmental, and industry perspectives, effectively steering enterprises through the maze of regulations and standards while bringing end-to-end visibility on the immutable and constantly up-to-date compliance/certification status of an enterprise, its solutions, and its data/AI assets to any interested stakeholder.
ACCOMPLISH practically contributes to the current research and advance the state-of-the-art techniques and technologies across a number of research paths, including AI-based, automated assessment, recommendation and certification of compliance at different levels ranging from organisation and data/AI operations, to integrated systems/solutions and selected datasets/models; compliant-by-design and compliant-by-default (on-the-job) data/AI operations from data harvesting, retention, security, bias detection and quality assurance to AI/ML model design, training, evaluation, execution and observability/monitoring, that act as exemplary compliance technology enablers and complement the underlying data spaces.
ACCOMPLISH designs a novel AI-based compliance and certification framework cross-cutting the different regulatory/legal, environmental, cybersecurity and business/industry-specific compliance perspectives while always ensuring a human-in-the-loop approach.
Partners: 24 European partners including MAN | Ubitech | Tofas Turk Otomobil | Whirlpool | PWC
Funding agency: This project is funded by the HORIZON-CL4-2024-DATA-01-01 Program.
Interior and Exterior
Fusion
In-cabin analysis and exterior analysis are a powerful combination for providing innovative safety and driving experience features. In the future it will be important for ADAS like automatic emergency breaking systems to know the status of the driver and the passengers.
Within this field, we are working with large Tier-1 partners on innovative approaches to provide occupant-aware advanced driver assistance systems.
The concept of the resultant integrated, intelligent general vision system to be developed delivers outcomes and findings about in-depth automation steps as follows:
– Aimed at strongly improved image- and therefore environment perception, the headlamps provide a tailored adaptive scenery illumination to assigned lamp-cameras.
– The stereoscopic, high resolution camera system provides significantly improved information about data related to glare free high beam control, as object classification, positioning (horizontal, vertical), distance, direction of movement, lane,
– The stereoscopic camera system enables highly improved information processing based on data relevant for autonomous driving like addressed and labelled lanes, topology, free space, obstacles, traffic participants, pedestrians, etc.
Read more about the project on the official site of TU Vienna by clicking here.
Partners: ZKW | TU Vienna | emotion3D
Funding agency: This project is funded by the FFG within the IKT der Zukunft program.
The safe detection of vulnerable road users (pedestrians, cyclists) is an important social goal as well as a demanding technical challenge, which is currently insufficiently solved, especially in poor visibility conditions (night, fog), at long distances (>100m) and when approaching from the side (crossing situations). The SmartProtect project addresses this problem by means of a holistic, integrative approach that includes software, a combination of imaging and distance-detecting sensor technology and component design with interactive modular architecture. The main characteristics of the novel automotive perception system are fused sensor data with prediction function and automated, problem-specific control of headlights and infrared lighting, supported by reactive camera and LIDAR systems, which are installed in the same component housing and cover different detection angles. The envisaged multimodal systems will be evaluated in real driving conditions and in representative, reproducible test scenarios.
Partners: ZKW | TU Vienna | emotion3D
Funding agency: This project is funded by the FFG within the MdZ-2019 program.
Simulation-based
AI Development
For training, testing algorithm improvement and validation a large amount of high-quality data is required. Generating data in real-life is highly effortful and raises questions of data privacy. Thus, we are heavily investigating alternative ways to create data such as from computer graphics simulations.
The aim of the project is to provide a cost- and time-efficient simulation workflow for the development of environment analysis applications for vehicle interiors. Our innovative approach simulates complex dynamic vehicle interior scenarios (e.g. generation and animation of 3D person models, materials and surfaces, matching sensor configurations, etc.) and in particular enables the production of synthetic data for training, validation and testing purposes. This avoids the need for costly data acquisition and manual annotation and enables the replication of a variety of scenarios, environmental conditions and sensor modalities. In contrast to real (i.e. non-simulated) data sets, the planned simulation workflow can also capture rare or potentially dangerous scenarios (e.g. situations during a collision or microsleep). In addition to applications in the automotive sector, we also see operator safety in the transport sector (e.g. bus, train) and commercial vehicle sector (e.g. trucks, construction machinery) as promising areas of application for the proposed simulation workflow.
Partners: BECOM Systems | Rechenraum | TU Vienna | emotion3D
Funding agency: This project is funded by the FFG within the MdZ-2020 program.
Supporters





